Car heating warm-up system cho Infiniti EX 10.2008 - ...
Car heating warm-up system cho Infiniti EX
Power:
Dimensions:
Lenght:
Tất cả các bộ lọc
Power consumption:
Connector diameter:
Các kết quả: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Mã sản phẩm:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4272313.05-12%3739019.88 vnd -
-
4272313.05 - Giá đã giảm
- 3739019.88 vnd
-
- Quý khách tiết kiệm được 533293.17 vnd (-12%)
-
- trong cửa hàng
- 3 chiếc
-
ngày giao hàng:
29.04.2024, 12:46
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Mã sản phẩm:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
795599.63-13%690622.79 vnd -
-
795599.63 - Giá đã giảm
- 690622.79 vnd
-
- Quý khách tiết kiệm được 104976.83 vnd (-13%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Mã sản phẩm:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
1017217.39 vnd
- Giá: 1017217.39 vnd
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
ĐỌC THÊM
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Mã sản phẩm:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
3763704.36-12%3317213.73 vnd -
-
3763704.36 - Giá đã giảm
- 3317213.73 vnd
-
- Quý khách tiết kiệm được 446490.62 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Mã sản phẩm:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4046355.16-14%3479968.52 vnd -
-
4046355.16 - Giá đã giảm
- 3479968.52 vnd
-
- Quý khách tiết kiệm được 566386.64 vnd (-14%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | TẤT CẢ CÁC THUỘC TÍNH |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Mã sản phẩm:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4227012.97-12%3699416.22 vnd -
-
4227012.97 - Giá đã giảm
- 3699416.22 vnd
-
- Quý khách tiết kiệm được 527596.75 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Mã sản phẩm:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4263361.54-12%3762076.81 vnd -
-
4263361.54 - Giá đã giảm
- 3762076.81 vnd
-
- Quý khách tiết kiệm được 501284.73 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | TẤT CẢ CÁC THUỘC TÍNH |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Mã sản phẩm:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4471145.15 vnd
- Giá: 4471145.15 vnd
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
ĐỌC THÊM
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Mã sản phẩm:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
5108601.38-5.9%4806962.52 vnd -
-
5108601.38 - Giá đã giảm
- 4806962.52 vnd
-
- Quý khách tiết kiệm được 301638.86 vnd (-5.9%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
03.05.2024, 11:55
- Thêm vào giỏ hàng
ĐỌC THÊM
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
ENGINE HEATER TT-THERMO 1500KLD
Mã sản phẩm:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
3187281.17 vnd
- Giá: 3187281.17 vnd
- trong kho của nhà cung ứng: KHÔNG CÓ SẴN
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | TẤT CẢ CÁC THUỘC TÍNH |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Tất cả linh kiện cho Infiniti EX
- Sản phẩm giảm giá
- Cản trong nhựa -47%
- Khay kéo, thân cầu xeNEW! -42%
- Vòng đệm trục, trục khuỷuNEW! -41%
- Car heating warm-up system
- Bơm chân không, hệ thống phanhNEW! -38%
- Ống lót vòng bi, bộ ổn địnhNEW! -38%
- Giá khung, bộ làm mátNEW! -38%
- Vòng đệm trục, trục dẫn độngNEW! -38%
- Bộ dụng cụ sửa chữa, cơ cấu láiNEW! -38%
- Đai ốc bánh xeNEW! -38%
- Tow hook -37%
- Bộ gioăng, kẹp phanhNEW! -36%
- Bộ ống dẫn hướng, kẹp phanhNEW! -36%
- Bộ phụ kiện, má phanh đĩaNEW! -36%
- Ống lót vòng bi, thanh chỉnh bánh lái ngangNEW! -36%
- Hộp xếp, hệ thống láiNEW! -36%
- Vít hiệu chỉnhNEW! -36%
- Nắp/hộp xếp bảo vệ, bộ giảm xócNEW! -36%
- Bệ gắn lò xoNEW! -36%
- Cảm biến, tốc độ bánh xeNEW! -36%
- Linh kiện hiệu chỉnh
- Gương và các linh kiện kết nối
- Hệ thống phanh
- Bộ má phanh, phanh đĩaNEW! -27%
- Đĩa phanhNEW! -27%
- Bộ gioăng, kẹp phanhNEW! -36%
- Kẹp phanhNEW! -34%
- Bộ guốc phanhNEW!
- Bộ ống dẫn hướng, kẹp phanhNEW! -36%
- Ống phanhNEW! -34%
- Bộ phụ kiện, má phanh đĩaNEW! -36%
- Xi lanh phanh chínhNEW!
- Công tắc đèn phanhNEW!
- Pít-tông, kẹp phanhNEW!
- Bộ phụ kiện, guốc hãm phanh đỗNEW!
- Bộ dụng cụ sửa chữa, điều chỉnh tự độngNEW!
- Bơm chân không, hệ thống phanhNEW! -38%
- Giá đỡ, kẹp phanhNEW!
- Lá chống rít, má phanh (tấm sau)NEW!
- Linh kiện bộ phận lái
- Tay lái, hệ thống treo bánh xe -26%
- Thanh/thanh chống, bộ ổn địnhNEW!
- Đầu thanh giằngNEW!
- Khớp đỡ/dẫn hướngNEW!
- Ống lót vòng bi, thanh chỉnh bánh lái ngangNEW! -36%
- Ống lót vòng bi, bộ ổn địnhNEW! -38%
- Khớp trục, thanh giằngNEW!
- Bơm thủy lực, hệ thống láiNEW!
- Hộp xếp, hệ thống láiNEW! -36%
- Bộ ổn định, khung gầmNEW!
- Vít hiệu chỉnhNEW! -36%
- Bộ hộp xếp, hệ thống láiNEW!
- Bộ dụng cụ sửa chữa, khớp đỡ/dẫn hướngNEW!
- Giá đỡ, khung thanh chỉnh bánh lái dàiNEW!
- Khay kéo, thân cầu xeNEW! -42%
- Giá khung, thân cầu xeNEW!
- Khớp, cột láiNEW!
- Bộ thử điện ápNEW!
- Vòng đệm trục, bơm servoNEW!
- Linh kiện điện
- BugiNEW!
- Cảm biến, tốc độ bánh xeNEW! -36%
- Máy phát xung, trục khuỷuNEW! -35%
- Cuộn dây đánh lửaNEW! -30%
- Cảm biến, nhiệt độ nước làm mátNEW!
- Máy phát điệnNEW!
- Đầu dò LambdaNEW! -30%
- Bộ khởi độngNEW!
- Bugi đốt nóng
- Cảm biến, hỗ trợ đỗNEW! -30%
- Cảm biến, áp suất dầuNEW! -24%
- Máy đo khối lượng không khí
- Boost pressure sensorNEW! -33%
- Công tắc đèn phanhNEW!
- Cảm biến gõNEW!
- Cảm biến, áp suất khí thảiNEW! -30%
- Cảm biến, nhiệt độ dầuNEW!
- Bơm cao ápNEW!
- Bộ dụng cụ sửa chữa cáp, bugi đốt nóngNEW!
- Bugi, bộ gia nhiệt điệnNEW!
- Bộ đo lưu lượng không khíNEW!
- Thiết bị điều khiển, quạt điện (làm mát động cơ)NEW!
- Cảm biến, gia tốc dọc/ngangNEW!
- Cuộn dây đánh lửaNEW!
- Assortment, plug housings
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Bộ đảo điện
- Electrical appliances
- Fuses set
- Jumper cables
- Sender Units/ Sensors
- Ắc quy khởi động
- Linh kiện nhiệt
- Bộ điều chỉnh nhiệt, nước làm mátNEW!
- Bộ tản nhiệt, hệ thống làm mát động cơ -31%
- Bơm nướcNEW!
- Quạt bên trong cabinNEW!
- Bình ngưng, điều hòa không khí -30%
- Nắp khóa, bình nước làm mátNEW!
- Máy nén, điều hòa không khíNEW!
- Quạt, hệ thống làm mát động cơ -29%
- Máy sấy, điều hòa không khíNEW!
- Khớp nối từ tính, máy nén không khíNEW!
- Van giãn nở, điều hòa không khíNEW! -35%
- Giá khung, bộ làm mátNEW! -38%
- Điện trở nối tiếp, quạt làm mát động cơ điện
- Gioăng, vỏ bộ điều chỉnh nhiệtNEW!
- Gioăng, mặt bích chất làm mátNEW!
- Chống sương giáNEW!
- Đĩa truyền động, máy nén ly hợp từ tínhNEW!
- Pressure switch
- Air conditioning bearing
- Oring set
- R134a
- Động cơ
- Vít khóa, cácte dầuNEW!
- Gioăng, nắp đậy đầu xi lanhNEW! -36%
- Gioăng, đầu xi lanhNEW! -34%
- Vòng đệm trục, trục khuỷuNEW! -41%
- Bộ gioăng, đầu xi lanhNEW!
- Bộ xích truyền động trục camNEW!
- Bộ vít đầu xi lanhNEW!
- Gioăng, ống hútNEW! -35%
- Gioăng, ống xả khíNEW! -36%
- Bộ gioăng, nắp đầu xi lanhNEW! -35%
- Bộ gioăng, cán vanNEW!
- Bộ dụng cụ lắp ráp, bộ nạpNEW!
- Bộ nạp, sạcNEW!
- Bộ gioăng, cácteNEW!
- SumpNEW!
- Van điều khiển, điều chỉnh trục camNEW!
- Trọn bộ gioăng, động cơNEW!
- Vòng đệm, cán vanNEW!
- Bộ điều chỉnh trục camNEW!
- Vòng đệm trục, trục camNEW!
- Bộ làm mát, tuần hoàn khí thảiNEW!
- Gioăng, vỏ bộ điều khiểnNEW!
- Bộ gioăng, bộ dẫn động phụNEW! -36%
- Vòng đệm, trục đánh lửaNEW!
- Vòng đệm trục, trục camNEW!
- Ổ trục truyền động, máy phát điệnNEW!
- Bộ dụng cụ sửa chữa, bơm dầuNEW!
- Linh kiện hệ thống dẫn động
- Ổ trục bánh xeNEW!
- Khớp, trục dẫn độngNEW! -34%
- Hộp xếp, trục dẫn độngNEW! -36%
- Vòng đệm trục, bộ vi saiNEW!
- Vòng đệm trục, trục dẫn độngNEW! -38%
- Vòng đệm trục, hộp số tayNEW!
- Vòng đệm trục, trục bánh xeNEW! -36%
- Đai ốc trục, trục dẫn độngNEW!
- Chân sao, trục dẫn độngNEW!
- Drive Shaft -30%
- Khớp, trục láiNEW! -35%
- Dầu, dẫn động bốn bánh ly hợp nhiều đĩaNEW!
- Khớp nối chéoNEW!
- Động cơ, hộp truyền động và giá hệ thống dẫn động
- Hệ thống an ninh
- Linh kiện hệ thống nạp khí
- Linh kiện hệ thống nhiên liệu
- Trang bị nhà xưởng
- Lò xo khí
- Linh kiện hệ thống gạt nước
- Trang bị nội thất xe
- Hệ thống làm nóng
- Hóa chất cho ô tô
- Phụ kiện
- Accessories
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Bật lửa
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Electronic parking clock
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Giá nóc
- Hộp mái
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Multimeter
- Nhãn dán
- Parking assistant system -22%
- Parking clock
- Petrol can
- Pets
- Radio
- Reflective plate
- Rudder cover
- Safety Goggles
- Spade
- Sponge
- Stickers and car identification
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Water Can
- Winches
- Wipes
- Đèn hiệu báo trước
- Vòng đệm vạn năng
- Hóa chất và sản phẩm chăm sóc mỹ phẩm
Phụ tùng này () không tồn tại trong cơ sở dữ liệu của chúng tôi hoặc nó có tên khác.
Hiển thị tất cả các phụ tùng thay thế
Hiển thị tất cả các phụ tùng thay thế
- Quý khách cũng có thể thích
- Hệ thống làm nóng
- Car heating warm-up system
- Car heating warm-up system cho Infiniti