Car heating warm-up system cho Toyota HILUX SURF/4-RUNNER 01.1996 - 01.2002
Car heating warm-up system cho Toyota HILUX SURF/4-RUNNER
Power:
Dimensions:
Lenght:
Tất cả các bộ lọc
Power consumption:
Connector diameter:
Các kết quả: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Mã sản phẩm:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4291524.83-12%3755833.54 vnd -
-
4291524.83 - Giá đã giảm
- 3755833.54 vnd
-
- Quý khách tiết kiệm được 535691.28 vnd (-12%)
-
- trong cửa hàng
- 3 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Mã sản phẩm:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
799177.29-13%693728.39 vnd -
-
799177.29 - Giá đã giảm
- 693728.39 vnd
-
- Quý khách tiết kiệm được 105448.89 vnd (-13%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Mã sản phẩm:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
1021791.62 vnd
- Giá: 1021791.62 vnd
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Mã sản phẩm:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
3780629.01-12%3332130.61 vnd -
-
3780629.01 - Giá đã giảm
- 3332130.61 vnd
-
- Quý khách tiết kiệm được 448498.40 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Mã sản phẩm:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4064550.85-14%3495617.27 vnd -
-
4064550.85 - Giá đã giảm
- 3495617.27 vnd
-
- Quý khách tiết kiệm được 568933.57 vnd (-14%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | TẤT CẢ CÁC THUỘC TÍNH |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Mã sản phẩm:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4246021.04-12%3716051.78 vnd -
-
4246021.04 - Giá đã giảm
- 3716051.78 vnd
-
- Quý khách tiết kiệm được 529969.25 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Mã sản phẩm:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4282533.06-12%3778994.15 vnd -
-
4282533.06 - Giá đã giảm
- 3778994.15 vnd
-
- Quý khách tiết kiệm được 503538.91 vnd (-12%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | TẤT CẢ CÁC THUỘC TÍNH |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Mã sản phẩm:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
4491251.03 vnd
- Giá: 4491251.03 vnd
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Mã sản phẩm:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
5131573.78-5.9%4828578.50 vnd -
-
5131573.78 - Giá đã giảm
- 4828578.50 vnd
-
- Quý khách tiết kiệm được 302995.27 vnd (-5.9%)
-
- có thể đặt
- 5 chiếc
-
ngày giao hàng:
17.05.2024, 18:00
- Thêm vào giỏ hàng
ĐỌC THÊM
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
ENGINE HEATER TT-THERMO 1500KLD
Mã sản phẩm:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
3201613.76 vnd
- Giá: 3201613.76 vnd
- trong kho của nhà cung ứng: KHÔNG CÓ SẴN
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | TẤT CẢ CÁC THUỘC TÍNH |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
ĐỌC THÊM |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Hệ thống làm nóng cho Toyota HILUX SURF/4-RUNNER
Tất cả linh kiện cho Toyota HILUX SURF/4-RUNNER
- Sản phẩm giảm giá
- Ánh sáng
- Đèn đầu chính
- Bộ đèn hậu
- Side flasher
- Đèn nháy trước
- Chóa đèn pha
- Đèn nhấp nháyNEW!
- Bóng đèn, đèn bảo vệ cửaNEW!
- Ống kính, đèn hậu
- Bộ dụng cụ sửa chữa cáp, đèn pha chínhNEW!
- Bóng đèn, đèn đọc sáchNEW!
- Đèn bên trong cabinNEW!
- Parking lamp
- Đui đèn, đèn pha chính
- Front flasher with parking lamp
- Side flasher bulb socket
- Bulb
- Universal tail light
- Linh kiện hiệu chỉnh
- Gương và các linh kiện kết nối
- Hệ thống phanh
- Bộ má phanh, phanh đĩaNEW!
- Đĩa phanhNEW!
- Bộ gioăng, kẹp phanhNEW!
- Kẹp phanhNEW!
- Bộ guốc phanhNEW!
- Tời kéo cáp, phanh đỗNEW!
- Ống phanhNEW!
- Bộ phụ kiện, má phanh đĩa
- Xi lanh phanh chínhNEW!
- Xi lanh phanh bánh xeNEW!
- Bộ phụ kiện, guốc hãm phanh đỗ
- Công tắc đèn phanhNEW!
- Pít-tông, kẹp phanhNEW!
- Bộ dụng cụ sửa chữa, điều chỉnh tự độngNEW!
- Tang trống phanhNEW!
- Vòng cảm biến, ABSNEW!
- Bộ dụng cụ sửa chữa, xi lanh phanh chínhNEW!
- Bộ dụng cụ sửa chữa, xi lanh phanh bánh xeNEW!
- Bộ điều chỉnh, phanh tang trốngNEW!
- Tời kéo cáp, phanh thườngNEW!
- Linh kiện bộ phận lái
- Tay lái, hệ thống treo bánh xe
- Thanh/thanh chống, bộ ổn địnhNEW!
- Đầu thanh giằngNEW!
- Khớp đỡ/dẫn hướngNEW!
- Ống lót vòng bi, thanh chỉnh bánh lái ngangNEW!
- Ống lót vòng bi, bộ ổn địnhNEW!
- Khớp trục, thanh giằngNEW!
- Cơ cấu láiNEW!
- Bơm thủy lực, hệ thống láiNEW!
- Hộp xếp, hệ thống láiNEW!
- Bộ ổn định, khung gầmNEW!
- Vít hiệu chỉnhNEW!
- Bộ dụng cụ sửa chữa, thanh chỉnh bánh lái ngangNEW!
- Bộ hộp xếp, hệ thống láiNEW!
- Bộ tay lái, hệ thống treo bánh xeNEW!
- Ống lót vòng bi, lò xo dẹtNEW!
- Giá khung, thanh chống trụcNEW!
- Bộ dụng cụ sửa chữa, khớp đỡ/dẫn hướngNEW!
- Bu lông cố định, thanh chỉnh bánh lái ngangNEW!
- Ống thủy lực, hệ thống láiNEW!
- Ống lót, khung thanh chỉnh bánh lái ngangNEW!
- Khay kéo, thân cầu xeNEW!
- Bộ dụng cụ lắp ráp, khớp đỡ/dẫn hướngNEW!
- Giá khung, cơ cấu láiNEW!
- Giá khung, thanh khớp nối ổn địnhNEW!
- Cần lái trung gianNEW!
- Giá đỡ, giá khung bộ ổn địnhNEW!
- Giá khung, thân cầu xeNEW!
- Bộ thử điện ápNEW!
- Linh kiện điện
- BugiNEW!
- Cảm biến, tốc độ bánh xeNEW!
- Mô-đun phân phối nhiên liệuNEW!
- Cuộn dây đánh lửaNEW!
- Máy phát xung, trục khuỷuNEW!
- Cảm biến, nhiệt độ nước làm mátNEW!
- Máy phát điệnNEW!
- Đầu dò LambdaNEW!
- Bộ khởi độngNEW!
- Bugi đốt nóng
- Cảm biến, áp suất dầuNEW!
- Máy đo khối lượng không khí
- Bộ cáp đánh lửaNEW!
- Công tắc đèn phanhNEW!
- Bộ điều chỉnh máy phát điệnNEW!
- Công tắc, đèn báo lùi xeNEW!
- Lò xo xoắn, túi khíNEW!
- Cảm biến, nhiệt độ bên ngoàiNEW!
- Cảm biến, nhiệt độ khí nạpNEW!
- Thiết bị điều khiển, thời gian phát sángNEW!
- Cảm biến gõNEW!
- Cảm biến, vị trí van tiết lưuNEW!
- Cảm biến, tốc độNEW!
- Cảm biến, nhiệt độ dầuNEW!
- Cảm biến, tốc độNEW!
- Cảm biến tốc độ, hộp số tự độngNEW!
- Bơm nước rửa, vệ sinh cửa sổNEW!
- Rơ-le cảnh báo nguy hiểmNEW!
- Bugi, bộ gia nhiệt điệnNEW!
- Công tắc, khởi động phanh (điều khiển động cơ)NEW!
- Van sang số, hộp số tự độngNEW!
- Assortment, plug housings
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Bộ đảo điện
- Electrical appliances
- Fuses set
- Jumper cables
- Sender Units/ Sensors
- Ắc quy khởi động
- Linh kiện nhiệt
- Bộ điều chỉnh nhiệt, nước làm mátNEW!
- Bộ tản nhiệt, hệ thống làm mát động cơ
- Bơm nướcNEW!
- Quạt bên trong cabin
- Bình ngưng, điều hòa không khí
- Nắp khóa, bình nước làm mát
- Ống tản nhiệtNEW!
- Máy nén, điều hòa không khíNEW!
- Bộ trao đổi nhiệt, hệ thống sưởi trong cabin
- Quạt, hệ thống làm mát động cơ
- Khóa, cổ nạp dầuNEW!
- Máy sấy, điều hòa không khíNEW!
- Ly hợp, quạt tản nhiệt
- Bình bay hơi, điều hòa không khíNEW!
- Gioăng, bộ điều chỉnh nhiệtNEW!
- Van giãn nở, điều hòa không khíNEW!
- Heater hoseNEW!
- Gioăng, van EGRNEW!
- Gioăng, bơm nướcNEW!
- Gioăng, mặt bích chất làm mátNEW!
- Bánh cánh quạt, hệ thống làm mát động cơ
- Chống sương giáNEW!
- Fan shroud
- Vít/van thông khí, bộ tản nhiệtNEW!
- Air conditioning bearing
- Oring set
- R134a
- Động cơ
- Vít khóa, cácte dầuNEW!
- Gioăng, nắp đậy đầu xi lanhNEW!
- Gioăng, đầu xi lanhNEW!
- Vòng đệm trục, trục khuỷuNEW!
- Bộ gioăng, đầu xi lanhNEW!
- Bộ vít đầu xi lanhNEW!
- Gioăng, ống hútNEW!
- Bộ xích truyền động trục camNEW!
- Gioăng, ống xả khíNEW!
- Bộ gioăng, nắp đầu xi lanhNEW!
- Puly, trục khuỷuNEW!
- Bộ gioăng, cán vanNEW!
- Bộ dụng cụ lắp ráp, bộ nạpNEW!
- Ổ trục thanh nốiNEW!
- Van xả khíNEW!
- Van đầu vàoNEW!
- Bộ gioăng, cácteNEW!
- Ổ trục khuỷuNEW!
- Ống hút, bộ lọc không khíNEW!
- Cam nâng vanNEW!
- Bơm dầuNEW!
- Gioăng, vỏ bộ lọc dầuNEW!
- Bộ chuyển đổi áp suất, kiểm soát khí thảiNEW!
- Trọn bộ gioăng, động cơNEW!
- Vòng đệm, cán vanNEW!
- Dẫn hướng vanNEW!
- Dây xích truyền động trục camNEW!
- Gioăng, vỏ ống hútNEW!
- Gioăng, bộ điều chỉnh nhiệtNEW!
- Trục camNEW!
- Gioăng, nắp cổ nạp dầuNEW!
- Đầu xi lanhNEW!
- Vòng đệm trục, trục camNEW!
- Conrod Bearing SetNEW!
- Gioăng, bơm dầuNEW!
- Gioăng, vỏ bộ điều khiểnNEW!
- Bộ ổ trục khuỷuNEW!
- Đĩa cách, trục khuỷuNEW!
- Vòng đệm, trục đánh lửaNEW!
- Đĩa điều chỉnh, khe vanNEW!
- Bộ vòng đệm trục, động cơNEW!
- Vòng đệm trục, trục camNEW!
- Bộ cần lắc, điều khiển động cơNEW!
- Ống bôi trơn, bôi trơn camNEW!
- Vòng đệm, ống lót xi lanhNEW!
- Gioăng, đầu vào tuabin (bộ nạp)NEW!
- Linh kiện hệ thống dẫn động
- Ổ trục bánh xeNEW!
- Khớp, trục dẫn độngNEW!
- Hộp xếp, trục dẫn độngNEW!
- Trục dẫn độngNEW!
- Vòng đệm trục, bộ vi saiNEW!
- Vòng đệm trục, trục dẫn độngNEW!
- Ổ trục, vòng bi tâm trục các-đăngNEW!
- Vòng đệm trục, hộp số tayNEW!
- Vòng đệm trục, trục bánh xeNEW!
- Cam lái, hệ thống treo bánh xeNEW!
- Drive ShaftNEW!
- Khớp, trục láiNEW!
- Dầu, dẫn động bốn bánh ly hợp nhiều đĩaNEW!
- Khớp nối chéoNEW!
- Giá đỡ, ổ trục tâm trục các-đăngNEW!
- Gioăng, hộp số tayNEW!
- Bộ chi tiết gắn khóa đầu ống, trục bánh xe/ổ trục bánh xeNEW!
- Đai và ròng rọc
- Động cơ, hộp truyền động và giá hệ thống dẫn động
- Hệ thống an ninh
- Linh kiện hệ thống gạt nước
- Trang bị nội thất xe
- Điều khiển cửa kính
- Linh kiện hệ thống nạp khí
- Trang bị nhà xưởng
- Khác 2
- Khác
- GioăngNEW!
- Ống cách, bộ giảm xócNEW!
- Engine OilNEW!
- Bộ điều chỉnh hệ đònNEW!
- Vòng cáchNEW!
- Gioăng, vỏ hộp số tayNEW!
- Vòng kẹp, giá đỡ lò xoNEW!
- Giá khung, hệ thống treo lò xoNEW!
- Dầu hộp số tự độngNEW!
- Dầu hộp số tự độngNEW!
- Ống cáchNEW!
- Gioăng, cửa nạp dầu (bộ nạp)NEW!
- Vòng truyền động, trục bánh xeNEW!
- Vòng đẩyNEW!
- Tấm che, kẹp phanhNEW!
- Cảm biến áp suất, bình nhiên liệuNEW!
- Đòn quay láiNEW!
- Bu lông bi, thanh giằngNEW!
- Giá khung bộ giảm chấn, cabinNEW!
- Bơm cấp liệu tay
- Carry Case
- Cover, battery post clamp
- Earth Cable, distributor
- Kẹp cực ắc quy
- Miscellaneous
- Nhạc hiệu
- Sơn kết hợp của xe
- Wire Brush, battery post/clamp cleaning
- Lò xo khí
- Hệ thống làm nóng
- Hóa chất cho ô tô
- Phụ kiện
- Accessories
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Bật lửa
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Giá nóc
- Hộp mái
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Nhãn dán
- Parking assistant system
- Parking clock
- Petrol can
- Pets
- Radio
- Reflective plate
- Rudder cover
- Safety Goggles
- Spade
- Sponge
- Stickers and car identification
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Water Can
- Winches
- Wipes
- Đèn hiệu báo trước
- Vòng đệm vạn năng
- Hóa chất và sản phẩm chăm sóc mỹ phẩm
Phụ tùng này () không tồn tại trong cơ sở dữ liệu của chúng tôi hoặc nó có tên khác.
Hiển thị tất cả các phụ tùng thay thế
Hiển thị tất cả các phụ tùng thay thế
- Quý khách cũng có thể thích
- Hệ thống làm nóng
- Car heating warm-up system
- Car heating warm-up system cho Toyota